Access Configuration

Access is the access module, mainly responsible for data upload, download, deletion, etc.

Access configuration is based on the public configuration, and the following configuration instructions mainly apply to private configuration for Access.

Configuration Instructions

First-Level Configuration

Configuration Item	Description	Required
Public Configuration Items	Refer to the Basic Service Configuration section	Yes
service_register	Service registration information	Yes, can be used for service discovery in Access after configuration
limit	Rate limiting configuration	No, single-machine rate limiting configuration
stream	Main Access configuration item	Yes, refer to the following second-level configuration options

Second-Level Stream Configuration

Configuration Item	Description	Required
idc	IDC for the service	Yes
max_blob_size	File segment blob size	No, default is 4MB
mem_pool_size_classes	Memory control for file read/write	No
encoder_concurrency	EC encoding/decoding concurrency	No, default is 1000
encoder_enableverify	Whether to enable EC encoding/decoding verification	No, default is enabled
min_read_shards_x	Number of shards to download concurrently for EC reading	No, default is 1. The larger the number, the higher the fault tolerance, but also the higher the bandwidth.
shard_crc_disabled	Whether to verify the data CRC of the blobnode	No, default is enabled
disk_punish_interval_s	Interval for temporarily marking a bad disk	No, default is 60s
service_punish_interval_s	Interval for temporarily marking a bad service	No, default is 60s
blobnode_config	Blobnode RPC configuration	Refer to the RPC configuration section rpc
proxy_config	Proxy RPC configuration	Refer to the RPC configuration section rpc
cluster_config	Main cluster configuration	Yes, refer to the following third-level configuration options

Third-Level Cluster Configuration

Configuration Item	Description	Required
region	Region information	Yes, do not change after configuration
region_magic	CRC field used for encoding file location	Yes, do not change after configuration. If changed, all locations will be invalidated.
consul_agent_addr	Consul address for cluster information	Yes
cluster_reload_secs	Interval for synchronizing cluster information	No, default is 3s
service_reload_secs	Interval for synchronizing service information	No, default is 3s
clustermgr_client_config	Clustermgr RPC configuration	Refer to the RPC configuration example rpc

Configuration Example

service_register

Note

Support for health_port began with version v3.2.1.

• consul_addr: Consul address for Access service registration
• service_ip: Access service bind IP
• node: Hostname
• health_port: Health check port range for Consul

{
    "consul_addr": "127.0.0.1:8500",
    "service_ip": "127.0.0.1",
    "node": "access-node1",
    "health_port": [9700, 9799]
}

limit

• reader_mbps: Single-machine download bandwidth (MB/s)
• writer_mbps: Single-machine upload bandwidth (MB/s)
• name_rps: RPS limit for each interface

{
    "name_rps": {
        "alloc": 0,
        "put": 100,
        "putat": 0,
        "get": 0,
        "delete": 0,
        "sign": 0
    },
    "reader_mbps": 1000,
    "writer_mbps": 200
}

mem_pool_size_classes

• key: Memory allocation ladder
• value: Limit on the number of items, 0 means no limit (Access currently does not enable quantity limits)

{
    "2048": 0,
    "65536": 0,
    "524288": 0,
    "2097152": 10240,
    "8389632": 4096,
    "16777216": 1024,
    "33554432": 512,
    "67108864": 64
}

Complete Example

{
    "max_procs": 0,
    "shutdown_timeout_s": 30,
    "log": {
        "level": "info",
        "filename": "./run/logs/access.log",
        "maxsize": 1024,
        "maxage": 7,
        "maxbackups": 7
    },
    "bind_addr": ":9500",
    "service_register": {
        "consul_addr": "127.0.0.1:8500",
        "service_ip": "127.0.0.1",
        "node": "access-node1",
        "health_port": [9700, 9799]
    },
    "limit": {
        "name_rps": {
           "put": 100
        },
        "reader_mbps": 1000,
        "writer_mbps": 200
    },
    "stream": {
        "idc": "idc",
        "max_blob_size": 4194304,
        "mem_pool_size_classes": {
            "2048": 0,
            "65536": 0,
            "524288": 0,
            "2097152": 10240,
            "8389632": 4096,
            "16777216": 1024,
            "33554432": 512,
            "67108864": 64
        },
        "encoder_concurrency": 1000,
        "encoder_enableverify": true,
        "min_read_shards_x": 1,
        "shard_crc_disabled": false,
        "cluster_config": {
            "region": "region",
            "region_magic": "region",
            "cluster_reload_secs": 3,
            "service_reload_secs": 3,
            "clustermgr_client_config": {
                "client_timeout_ms": 3000,
                "transport_config": {
                    "auth": {
                        "enable_auth": true,
                        "secret": "secret key"
                    },
                    "dial_timeout_ms": 2000
                }
            },
            "consul_agent_addr": "127.0.0.1:8500"
        },
        "disk_punish_interval_s": 60,
        "service_punish_interval_s": 60,
        "blobnode_config": {
            "client_timeout_ms": 10000
        },
        "proxy_config": {
            "client_timeout_ms": 5000
        }
    }
}

Edit on GitHub

Clustermgr Configuration Proxy Configuration